Precision Doors

Here at The Window Man we're proud to carry Precision Doors. Why are we so enthusiastic about these doors?

Here are some of the features that make Precision the perfect door for your new construction or renovation project in DC, Maryland and Virginia.

Features:

* Finish on doors backed by an exclusive 5-year warranty.
* Hinges are coated with a special rust resistant zinc dichromate finish.
* Our doors are available in our treated wood frame or Precision's exclusive 18-gauge steel L-frame design.
* The exclusive Precision 20-gauge steel security plate provides a level of security not found on residential doors.
* To reinforce the lock and deadbolt area, we add commercial gauge steel to our steel doors and a solid wood block to our fiberglass doors.
* Precision's multiple blade sweep eliminates drafts-keeping your home comfortable.
* Our corner seal is the most efficient you'll find in keeping moisture, air and dirt out of your home.
* Our fully adjustable oak or vinyl cap provides the best energy efficient fit with our style of sweep.
* Our own state-of-the-art threshold provides maximum thermal efficiency.
* Solid Brass Hardware from Schlage.
* We take extra precautions to protect your door during shipping.
* Using our own fleet of trucks to ensure that your door arrives undamaged and on time.
* Hundreds of style combinations available.

For more information about Precision entry doors, stop by any of The Window Man's three Virginia showrooms today.

Air Leakage

Here at The Window Man we pride ourselves on being the Educational Window Company. We start the educational process by talking about the three Window Evils.

1 Air Infiltration 60%
2 Radiant Heat 30%
2 Conduction/Convection 10%

Today we're going to talk about air infiltration, also called or air leakage.

Air leakage is unwanted amounts of outside air entering the house through cracks and small openings. A leaky house allows moisture, dust and allergens into your home, making it unhealthy. As air pressure changes in your home, these same leaks also allow heated or cooled air to escape. These air leaks waste energy dollars! Air infiltration causes cold drafts and temperature differences within a room, which frequently causes the thermostat to be set higher or lower, so that the average temperature is at the desired level. The Window Man takes pride in only selling windows that far exceed industry standards to reduce the air infiltration into your home.

Air leakage may come from gaps and cracks around the windows and doors in your home and can account for 50% of your heating costs. By reducing air infiltration, you can use lower thermostat settings and your comfort level significantly increases.

A good analogy is to think of going outside on a cold, windy day wearing an expensive, good quality winter coat all decked out with thermal fleece and water repellent, but if you don’t zip it up, you get little of the benefits you paid for.

Choose a window that has been tested and AAMA certified for air infiltration. If a manufacturer elects to have its product tested, it cannot have more than 0.3 cfm/ft2 of air leakage per linear foot of crack space.

Vinyl is the most popular material windows are made from, but vinyl moves! Vinyl expands and contracts 10 times more then other window materials and windows are tested at normal room temperatures. Our experience shows that vinyl windows need to be tested at “.10” cfm or less, which is 3 times better than a passing grade so they don’t become drafty in the winter when they shrink.

Soft-Lite DH-11 Vinyl Window

Here at The Window Man we're proud to carry the Soft-Lite DH-11 vinyl window.

These superior windows, perfect for new construction and renovations alike, boast the following features, among others:

- Constant Force balance system--easy lift action--maintenance free.

- V-shaped foam, tight compression seal creates three seals in one which gives maximum weather protection.

- Screen latch securely locks screen in place.

- Heavy duty vent lock provides fresh air and allows window to remain partially open.

- Maintenance Free. Will not rot, chip, peel, need scraping or painting.

- Cleaning is unbelievably easy with our tilt-in sashes.

- Accessory groove frames. Designed to accept mullions and trim accessories.

- Vinyl color options:

o White.
o Beige.
o Light oak interior and white or beige exterior.
o Medium oak interior and white or beige exterior.

For more information on these superior windows, click here. Or visit any of our three Northern Virginia showrooms.

Optium's SC7650 Series

The Window Man is pleased to carry Optimum's steel vertical sliding windows. Optimum's SC7650 Series carry either an MEA and or Underwriters Laboratories, Inc. (UL) label for fire resistance rating of 45 minutes, in accordance with the standards for Fire Tests of Window Assemblies, ANSI/ UL9 (NFPA 257, ASTM El63).

All principal cold rolled formed members are ASTM A528 Low Carbon Steel. Frame members have a minimum thickness of 20 gauge.

Sliding sash panels have EPDM gaskets throughout the entire perimeter (unless otherwise noted).

All units are reasonably free from scratches and blemishes and have the following:

* Zinc Coating (ASTM A525 Z200) on both surfaces, applied by a continuous hot dipped process (The Sendzimir System), followed by a "skin pass" (smoothing) procedure which eliminates roughness.
* Primer consisting of epoxy-ureic paint, applied at a thickness of 5 microns on both surfaces.>
* Baked polyester powder coating, (baked at 180-200 degrees C for 18-20 minutes) with an average thickness of 80 microns.

Windows are factory glazed with obscure or clear 1/4" wire glass. Lites have a minimum of 24 gauge wire with a maximum mesh size of one square inch as per Underwriters Laboratories requirements. Individual lites of glass shall not exceed a daylite dimension of 895 square inches each. Glass complies with ANSI Z97.l and ASTM C1036.

Frame are formed from 20 gauge steel sections, with corners which are mechanically assembled and reinforced. Sash members are 20 gauge formed sections which are coped and assembled. Corner joints are fully scaled to prevent leakage. Horizontal muntins, when required, consist of two sections of 20 gauge forming an "H" Section. Approved 1/4" wire glass are held in 3/4" uniform edge bite.

Lower sliding panel are furnished with standard pull handles and sweep lock at meeting rail. A fusible link assembly is attached directly to the front balancers and functions as the self-closing mechanism.

The Window Man sets all window frames in a level, plumb and square condition without distortion. Units are promptly anchored, flashed and caulked in accordance with good window installation practice.

For more information on Optium's SC7650 Series, stop by any of The Window Man's three Northern Virginia showrooms.

Precision Entry Doors: Decorative Glass

The Precision Entry doors we carry at The Window man are all crafted by hand, have genuine brass & zinc caming, and come with a10-Year Warranty

From day one, Precision’s goal has been to create world-class Decorative Glass for their doors, which is why The Window Man proudly stands behind these products. Precision has assembled a global artisan community, all masters of their craft. And we here at The Window Man are proud to bring you truly spectacular glass--whether it's the textural beauty of fine art glass, intricate sand carving, precision-shaped brass caming, or the prisms of light from hand cut bevels.

Keep in mind, though that each glass panel is handmade and so there are minor differences from piece to piece. This is characteristic of any handmade product and adds to its charm and beauty. The patterns can vary in size and particular shapes but pose no danger of spontaneous breakage or structural instability. Precision continually inspects for consistency. Any patterns that are severely out of character with the glass are not accepted. Our goal is to provide the finest quality glass panels.

Contact us or stop by any of our three Northern Virginia showrooms to find out about the various styles of glass we have available.

Soft-Lite's Sliding Patio Doors

The Window Man is proud to offer Soft-Lite patio doors. These elegant sliding doors are durable, energy-efficient and maintenance-free. Soft-Lite thermo glide doors offer:

- Heavy-duty fiberglass protruded sills. These sills are durable enough to bear heavy foot traffic anywhere along the sill.

- Fusion-welded metal reinforced sash. These reinforced sashes provide structural integrity and eliminates drafts.

- Multi-chambered, hollow core, welded main frame. This frame provides superior strength.

- 7/8" insulated glass. For maximum efficiency we also offer optional low-E.

- Soft-Lite vinyl. Our highest quality PVC vinyl stands up to the weather, wherever you live--for a lifetime.

- Warm edge spacer technology.


- Interlocking panels. These panels prevent separation when your patio door is closed.


- Easy rolling extruded aluminum screens.


- Easily fit into construction or replacement projects.


- Patio doors come in white, beige or brown and also come with colonial grids.

Stop by any of our three Northern Virginia show rooms to see Soft-Lite's full line of windows and doors--including our thermo glide patio doors.
.

The Right Window For Your Home

Most DC Metro area homeowners who’ve thought about replacing their windows have heard a lot about features and issues like cladding, glass, grills and grids, installation, vinyl versus aluminum versus composites, and Low-E.

But as you peruse the different brands and models available at Northern Virginia’s The Window Man and decide which is right for your home, make sure to weigh the following needs: function, comfort, energy savings, esthetics, and low maintenance. There’s a different window appropriate for each homeowner and for each home in Fairfax, VA, Chantilly, VA and Alexandria, VA. The Window Man’s consultants are poised to help you make the right choice for you and your family.